| Part Number : 19504-1 | Manufacturer : Hamilton Sundstrand Corporation | ||
| NSN : 5305-00-961-1462 (5305009611462) | |||
| Item Name : Setscrew | CAGE Code : 55820 | ||
| NIIN : 00-961-1462 (009611462) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06672 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 195041 | |||
Thank you for taking an interest in part number 19504-1, that of which is listed with the description Setscrew; Manufactured by Hamilton Sundstrand Corporation and listed alongside the NSN 5305009611462, part number 19504-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 19504-1 | Manufacturer : Hamilton Sundstrand Corporation | ||
| NSN Number : 5305-00-961-1462 (5305009611462) | |||
| Item Name : Setscrew | CAGE Code : 55820 | ||
| NIIN : 009611462 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 19504-1, that of which is listed with the description Setscrew; Manufactured by Hamilton Sundstrand Corporation and listed alongside the NSN 5305009611462, part number 19504-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-961-1462 Item PartTypeName: SETSCREW | 5305 | 009611462 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 19504-1 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.059 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 1.059 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.060 INCHES NOMINAL |
| AAUY | POINT LENGTH | 0.799 INCHES MINIMUM AND 0.839 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.159 INCHES MINIMUM AND 0.179 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CWDK | POINT CHAMFER ANGLE | 30.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
