Part Number : 160652-1 | Manufacturer : Hamilton Sundstrand Corporation | ||
NSN : 5305-01-122-4505 (5305011224505) | |||
Item Name : Setscrew | CAGE Code : 55820 | ||
NIIN : 01-122-4505 (011224505) | |||
FSC Code : 5305 Screws | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 06672 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 1606521 |
Thank you for taking an interest in part number 160652-1, that of which is listed with the description Setscrew; Manufactured by Hamilton Sundstrand Corporation and listed alongside the NSN 5305011224505, part number 160652-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 160652-1 | Manufacturer : Hamilton Sundstrand Corporation | ||
NSN Number : 5305-01-122-4505 (5305011224505) | |||
Item Name : Setscrew | CAGE Code : 55820 | ||
NIIN : 011224505 | |||
FSC CODE : 5305 Screws |
Thank you for taking an interest in part number 160652-1, that of which is listed with the description Setscrew; Manufactured by Hamilton Sundstrand Corporation and listed alongside the NSN 5305011224505, part number 160652-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-122-4505 Item PartTypeName: SETSCREW | 5305 | 011224505 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
160652-1 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASB | FASTENER LENGTH | 1.180 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
AASK | HEAD STYLE | HEXAGON |
AASU | HEAD HEIGHT | 0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
AAUY | POINT LENGTH | 1.149 INCHES MINIMUM AND 1.169 INCHES MAXIMUM |
AAVA | POINT DIAMETER | 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
ABQJ | POINT STYLE | FLAT |
ABQZ | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
AGAV | END ITEM IDENTIFICATION | POWER UNIT,GAS TURBINE ENGINE |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRHC | HOLE CONFIGURATION STYLE | HEXAGON FLATS |
CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
CWDK | POINT CHAMFER ANGLE | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote