| Part Number : SK287 | Manufacturer : Harding Safety Usa Inc | ||
| NSN : 3110-00-627-1192 (3110006271192) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 63504 | ||
| NIIN : 00-627-1192 (006271192) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number SK287, that of which is listed with the description Bearing Ball Annular; Manufactured by Harding Safety Usa Inc and listed alongside the NSN 3110006271192, part number SK287 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SK287 | Manufacturer : Harding Safety Usa Inc | ||
| NSN Number : 3110-00-627-1192 (3110006271192) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 63504 | ||
| NIIN : 006271192 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number SK287, that of which is listed with the description Bearing Ball Annular; Manufactured by Harding Safety Usa Inc and listed alongside the NSN 3110006271192, part number SK287 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-627-1192 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 006271192 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SK287 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 1.7500 INCHES MINIMUM AND 1.7505 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.8745 INCHES MINIMUM AND 3.8750 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGVT | OUTER RING WIDTH | 1.1880 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 2.4950 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | LABYRINTH |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| FEAT | SPECIAL FEATURES | ONE FELT ENCLOSED SEAL,ONE SYNTHETIC RUBBER RING TYPE SEA AND GROOVE IN BORE ON SET SCREW SIDE,OD OF INNER RING SHOULDERED TO A DIA OF 2.2500 IN. ON SIDE OPPOSITE SET SCREW,SELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COPPER ALLOY ALIGNMENT RING |
| MATT | MATERIAL | RUBBER AND WOOL SEAL |
| MATT | MATERIAL | STEEL OR COPPER ALLOY RETAINER |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| STYL | STYLE DESIGNATOR | SINGLE ROW BALL,EXTERNAL ALIGNING RING,INNER RING EXTENDED BOTH SIDES,WITH SETSCREW IN INNER RING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
