| Part Number : 46177-3 | Manufacturer : Harris Corporation | ||
| NSN : 5305-00-795-1926 (5305007951926) | |||
| Item Name : Thumbscrew | CAGE Code : 24930 | ||
| NIIN : 00-795-1926 (007951926) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06673 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 461773 | |||
Thank you for taking an interest in part number 46177-3, that of which is listed with the description Thumbscrew; Manufactured by Harris Corporation and listed alongside the NSN 5305007951926, part number 46177-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 46177-3 | Manufacturer : Harris Corporation | ||
| NSN Number : 5305-00-795-1926 (5305007951926) | |||
| Item Name : Thumbscrew | CAGE Code : 24930 | ||
| NIIN : 007951926 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 46177-3, that of which is listed with the description Thumbscrew; Manufactured by Harris Corporation and listed alongside the NSN 5305007951926, part number 46177-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-795-1926 Item PartTypeName: THUMBSCREW | 5305 | 007951926 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 46177-3 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.625 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 2.063 INCHES NOMINAL |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| AASU | HEAD HEIGHT | 0.437 INCHES NOMINAL |
| AAUY | POINT LENGTH | 0.125 INCHES NOMINAL |
| AAWC | FIRST DIAMETER FROM HEAD | 1.000 INCHES NOMINAL |
| AAWD | SECOND DIAMETER FROM HEAD | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.188 INCHES NOMINAL |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 1.125 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CWDK | POINT CHAMFER ANGLE | 60.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DRILLED AND TAPPED HOLE NO. 6-32 THRU HEAD AND SHOULDER |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 44286,FSCM 24930 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AASL | HEAD DIAMETER | 1.500 INCHES NOMINAL |
| ABQJ | POINT STYLE | CONE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
