| Part Number : A2222227G1 | Manufacturer : Harris Corporation | ||
| NSN : 5905-00-794-3601 (5905007943601) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 28527 | ||
| NIIN : 00-794-3601 (007943601) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number A2222227G1, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Harris Corporation and listed alongside the NSN 5905007943601, part number A2222227G1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A2222227G1 | Manufacturer : Harris Corporation | ||
| NSN Number : 5905-00-794-3601 (5905007943601) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 28527 | ||
| NIIN : 007943601 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number A2222227G1, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Harris Corporation and listed alongside the NSN 5905007943601, part number A2222227G1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-794-3601 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007943601 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 300-66-20 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 OHMS SINGLE SECTION |
| ADAT | BODY WIDTH | 0.187 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| ABHP | III OVERALL LENGTH | 0.530 INCHES NOMINAL |
| ABKW | III OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AAPN | SECTION QUANTITY | 1 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| SR-5 | DESIGN CONTROL REFERENCE | A2222227G1 |
| SR-5 | MANUFACTURERS CODE | 28527 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABMK | III OVERALL WIDTH | 0.187 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.060 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.030 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 4.000 INCHES MINIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| SR-5 | THE MANUFACTURERS DATA | |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
