| Part Number : 82732 | Manufacturer : Harris Graphics Corp | ||
| NSN : 3020-00-706-6375 (3020007066375) | |||
| Item Name : Gear Spur | CAGE Code : 14731 | ||
| NIIN : 00-706-6375 (007066375) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 82732, that of which is listed with the description Gear Spur; Manufactured by Harris Graphics Corp and listed alongside the NSN 3020007066375, part number 82732 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 82732 | Manufacturer : Harris Graphics Corp | ||
| NSN Number : 3020-00-706-6375 (3020007066375) | |||
| Item Name : Gear Spur | CAGE Code : 14731 | ||
| NIIN : 007066375 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 82732, that of which is listed with the description Gear Spur; Manufactured by Harris Graphics Corp and listed alongside the NSN 3020007066375, part number 82732 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 7.0000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 56 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR | NOMINAL OVERALL LENGTH | 2.000 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.100 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.000 INCHES |
| CWSN | KEYWAY NOMINAL WIDTH | 0.500 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 3.750 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 3.750 INCHES SECOND END |
| MATT | III MATERIAL | IRON CAST OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
