| Part Number : A-304 | Manufacturer : Hartzell Propeller Inc | ||
| NSN : 5306-00-510-6334 (5306005106334) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 24692 | ||
| NIIN : 00-510-6334 (005106334) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: A304 | |||
Thank you for taking an interest in part number A-304, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Hartzell Propeller Inc and listed alongside the NSN 5306005106334, part number A-304 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A-304 | Manufacturer : Hartzell Propeller Inc | ||
| NSN Number : 5306-00-510-6334 (5306005106334) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 24692 | ||
| NIIN : 005106334 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number A-304, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Hartzell Propeller Inc and listed alongside the NSN 5306005106334, part number A-304 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-510-6334 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 005106334 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A304 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.415 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.109 INCHES NOMINAL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.480 INCHES MAXIMUM |
| AAWD | SECOND DIAMETER FROM HEAD | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AAWE | THIRD DIAMETER FROM HEAD | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| AAWF | FOURTH DIAMETER FROM HEAD | 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| ASDB | WIDTH ACROSS FLATS | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| FEAT | SPECIAL FEATURES | 0.5000 HARDENED TO 35/40 ROCKWELL C SCALE,THREAD HARDENED TO 20/25 ROCKWELL C SCALE |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 5-317,5-876,FSCM 71321 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | H-S5,FSCM 24692 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| TEST | TEST DATA DOCUMENT | 24692-CA304 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
