| Part Number : 3244185 | Manufacturer : Hatch And Kirk Inc | ||
| NSN : 3020-00-264-9640 (3020002649640) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 00-264-9640 (002649640) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3244185, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020002649640, part number 3244185 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3244185 | Manufacturer : Hatch And Kirk Inc | ||
| NSN Number : 3020-00-264-9640 (3020002649640) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 002649640 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 3244185, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020002649640, part number 3244185 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-264-9640 Item PartTypeName: GEAR,HELICAL | 3020 | 002649640 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3244185 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS |
| AGJS | PITCH DIAMETER | 6.4200 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 26 |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM HUB AND 61.0 ROCKWELL C MAXIMUM HUB |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM TEETH AND 61.0 ROCKWELL C MAXIMUM TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.8700 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 23.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 4.4375 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 3.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.9557 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWWH | END NOMINAL LENGTH | 3.9375 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 5.906 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.500 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 6.500 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | COUNTERBORE BOTH ENDS,1.125 IN. DEEP BY 4.505 IN. DIA AND 1.625 IN. DEEP BY 4.125 IN. DIA |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
