| Part Number : 3239066 | Manufacturer : Hatch And Kirk Inc | ||
| NSN : 3020-00-353-8251 (3020003538251) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 00-353-8251 (003538251) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3239066, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020003538251, part number 3239066 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3239066 | Manufacturer : Hatch And Kirk Inc | ||
| NSN Number : 3020-00-353-8251 (3020003538251) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 003538251 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 3239066, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020003538251, part number 3239066 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-353-8251 Item PartTypeName: GEAR,HELICAL | 3020 | 003538251 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3239066 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 13.4000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 67 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 8.0 ROCKWELL C NOMINAL OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 13.6847 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 14.9167 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.375 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 2.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 3.3475 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWWH | END NOMINAL LENGTH | 1.625 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 5.3715 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.750 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 6.500 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | COUNTERWEIGHTS AND RIVETS,MATCH MARK FIG 4 77 DEG 34 MIN FROM CENTER LINE,DRILL AND TAP 0.125 NPT ONE HOLE 99 DEG FROM SAME CENTER LINE,4 HOLES 0.500-20 UNF 3B IN FACE OF HUB 2ND END,ONE GROOVE 4.870 IN. DIA BY 0.500 IN. W ON HUB 2ND END |
| MATT | MATERIAL | STEEL COMP 1035 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
