| Part Number : 3226333 | Manufacturer : Hatch And Kirk Inc | ||
| NSN : 3020-00-388-0105 (3020003880105) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 00-388-0105 (003880105) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3226333, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020003880105, part number 3226333 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3226333 | Manufacturer : Hatch And Kirk Inc | ||
| NSN Number : 3020-00-388-0105 (3020003880105) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 003880105 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 3226333, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020003880105, part number 3226333 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-388-0105 Item PartTypeName: GEAR,HELICAL | 3020 | 003880105 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| K3226333 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSA | SPLINE QUANTITY | 48 BOTH ENDS |
| AGJS | PITCH DIAMETER | 8.4853 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 1.9505 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 89.0 ROCKWELL B MINIMUM OVERALL AND 93.0 ROCKWELL B MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.817 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 45.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.250 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.500 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 2.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.000 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 3.249 INCHES BOTH ENDS |
| FEAT | SPECIAL FEATURES | TWO PLUGS,TWO PULLER HOLES 0.500-20 UNF 2B ON A 5.500 IN. DIA BOLT CIRCLE,OIL HOLES |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
