| Part Number : 3237660 | Manufacturer : Hatch And Kirk Inc | ||
| NSN : 3020-00-391-9532 (3020003919532) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 00-391-9532 (003919532) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3237660, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020003919532, part number 3237660 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3237660 | Manufacturer : Hatch And Kirk Inc | ||
| NSN Number : 3020-00-391-9532 (3020003919532) | |||
| Item Name : Gear Helical | CAGE Code : 55380 | ||
| NIIN : 003919532 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 3237660, that of which is listed with the description Gear Helical; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3020003919532, part number 3237660 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-9532 Item PartTypeName: GEAR,HELICAL | 3020 | 003919532 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3237660 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 10.8000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 10.0 ROCKWELL C MINIMUM OVERALL AND 16.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 11.0858 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STUB |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 27.3217 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.938 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 1.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.0000 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.997 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.997 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | TWO COUNTERWEIGHTS,ONE OIL PLUG,TWO RIVETS,THREE OIL HOLES 0.189 IN. DIA,ONE LOCATED 1.938 IN. FROM CENTER OF BORE ON 1ST END DRILLED 2.875 IN. DEEP,TWO LOCATED ON HUB SIDE 0.688 IN. FROM EACH HUB END,DRILLED AT A 6 DEG ANGLE TO MEET OIL HO |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
