| Part Number : 701365 | Manufacturer : Hatch And Kirk Inc | ||
| NSN : 3040-00-491-3602 (3040004913602) | |||
| Item Name : Shaft Shouldered | CAGE Code : 55380 | ||
| NIIN : 00-491-3602 (004913602) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 22914 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 701365, that of which is listed with the description Shaft Shouldered; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3040004913602, part number 701365 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 701365 | Manufacturer : Hatch And Kirk Inc | ||
| NSN Number : 3040-00-491-3602 (3040004913602) | |||
| Item Name : Shaft Shouldered | CAGE Code : 55380 | ||
| NIIN : 004913602 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 701365, that of which is listed with the description Shaft Shouldered; Manufactured by Hatch And Kirk Inc and listed alongside the NSN 3040004913602, part number 701365 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-491-3602 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 004913602 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 701365 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | WOODRUFF KEYWAY AND CIRCULAR GROOVED |
| AAHW | SECOND END GROOVE WIDTH | 0.0390 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM |
| AAHX | SECOND END GROOVE DIAMETER | 0.5810 INCHES MINIMUM AND 0.5910 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 8.375 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.2660 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.094 INCHES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.1240 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.500 INCHES MINIMUM AND 0.518 INCHES MAXIMUM |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.437 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | 0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | KA MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD BY A PERMEABILITY INDICATOR SPECIFIED IN MILITARY SPEC MIL-I-17214 |
| MATT | MATERIAL | STEEL COMP 316 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SPECIAL FEATURES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
