| Part Number : 45405 | Manufacturer : Heico Ohmite Llc | ||
| NSN : 5905-00-755-0850 (5905007550850) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 44655 | ||
| NIIN : 00-755-0850 (007550850) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 45405, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Heico Ohmite Llc and listed alongside the NSN 5905007550850, part number 45405 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 45405 | Manufacturer : Heico Ohmite Llc | ||
| NSN Number : 5905-00-755-0850 (5905007550850) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 44655 | ||
| NIIN : 007550850 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 45405, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Heico Ohmite Llc and listed alongside the NSN 5905007550850, part number 45405 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-755-0850 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007550850 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 45405 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 1.562 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 1.219 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 3.500 INCHES NOMINAL |
| AEDQ | UNDERCUT DIAMETER | 0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGQL | UNDERCUT LENGTH | 0.344 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL AND 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF AND UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND THREADED HOLE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 150.0 OHMS 2ND SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
