Part Number : RES50R | Manufacturer : Heico Ohmite Llc | ||
NSN : 5905-01-516-5778 (5905015165778) | |||
Item Name : Resistor Variable Wire Wound Non | CAGE Code : 44655 | ||
NIIN : 01-516-5778 (015165778) | |||
FSC Code : 5905 Resistors | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 37406 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number RES50R, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Heico Ohmite Llc and listed alongside the NSN 5905015165778, part number RES50R is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : RES50R | Manufacturer : Heico Ohmite Llc | ||
NSN Number : 5905-01-516-5778 (5905015165778) | |||
Item Name : Resistor Variable Wire Wound Non | CAGE Code : 44655 | ||
NIIN : 015165778 | |||
FSC CODE : 5905 Resistors |
Thank you for taking an interest in part number RES50R, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Heico Ohmite Llc and listed alongside the NSN 5905015165778, part number RES50R is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-01-516-5778 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 015165778 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
RES50R | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABWV | Shaft Diameter | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
AXGY | Mounting Method | STANDARD BUSHING |
AEDX | Shaft Style | ROUND, SLOTTED |
AJYQ | Screw Thread Quantity Per Inch | 32 |
AAPN | Section Quantity | 1 |
AEFD | Actuator Type | SINGLE SHAFT |
MRC | Decoded Requirement | Clear Text Reply |
APXH | Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
ABXF | Shaft Length | 0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
AAQL | Body Style | CYLINDRICAL BUSHING MOUNTED |
CRSS | Resistance Tolerance Per Section In Percent | -10.0/+10.0 SINGLE SECTION |
AARG | Reliability Indicator | NOT ESTABLISHED |
CRGD | Power Dissipation Rating Per Section In Watts | 12.5 HEAT SINK SINGLE SECTION |
ADAQ | Body Length | 0.625 INCHES MINIMUM AND 0.751 INCHES MAXIMUM |
AJYP | Screw Thread Series Designator | UNEF |
AJYN | Screw Thread Diameter | 0.250 INCHES NOMINAL |
ADAP | Mounting Bushing Length | 0.219 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
CQCC | Electrical Resistance Per Section | 50.0 OHMS SINGLE SECTION |
AGAV | End Item Identification | RUN IN CONSOL |
ABPM | Body Diameter | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
TTQY | Terminal Type And Quantity | 3 TAB, SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote