| Part Number : HPPBR2 | Manufacturer : Helicopter Parts Service Inc | ||
| NSN : 3110-00-542-1541 (3110005421541) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 1DC28 | ||
| NIIN : 00-542-1541 (005421541) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number HPPBR2, that of which is listed with the description Bearing Ball Duplex; Manufactured by Helicopter Parts Service Inc and listed alongside the NSN 3110005421541, part number HPPBR2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HPPBR2 | Manufacturer : Helicopter Parts Service Inc | ||
| NSN Number : 3110-00-542-1541 (3110005421541) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 1DC28 | ||
| NIIN : 005421541 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number HPPBR2, that of which is listed with the description Bearing Ball Duplex; Manufactured by Helicopter Parts Service Inc and listed alongside the NSN 3110005421541, part number HPPBR2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-542-1541 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 005421541 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HPPBR2 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 5.9990 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 7.1240 INCHES MINIMUM AND 7.1250 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0007 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| CTHQ | BEARING PRELOAD RATING | 100.0 POUNDS NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
