| Part Number : ST4M200-6 | Manufacturer : Heroux Devtek Inc | ||
| NSN : 3110-01-049-4147 (3110010494147) | |||
| Item Name : Bearing Roller Needle | CAGE Code : 36164 | ||
| NIIN : 01-049-4147 (010494147) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00051 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: ST4M2006 | |||
Thank you for taking an interest in part number ST4M200-6, that of which is listed with the description Bearing Roller Needle; Manufactured by Heroux Devtek Inc and listed alongside the NSN 3110010494147, part number ST4M200-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ST4M200-6 | Manufacturer : Heroux Devtek Inc | ||
| NSN Number : 3110-01-049-4147 (3110010494147) | |||
| Item Name : Bearing Roller Needle | CAGE Code : 36164 | ||
| NIIN : 010494147 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number ST4M200-6, that of which is listed with the description Bearing Roller Needle; Manufactured by Heroux Devtek Inc and listed alongside the NSN 3110010494147, part number ST4M200-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-049-4147 Item PartTypeName: BEARING,ROLLER,NEEDLE | 3110 | 010494147 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10107444 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.9350 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT,4 LUBE HOLES 90 DEGREES APART AND GROOVE IN INNER RINGS |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC ACETAL SEAL |
| MATT | MATERIAL | PLASTIC POLYAMIDE THRUST RETAINER |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP 1074 WASHER |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MS6440 FED SPEC SINGLE MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE WASHER |
| SFTT | SURFACE TREATMENT | CADMIUM INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM WASHER |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
