| Part Number : HR101V 5 10 | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-00-450-5955 (5305004505955) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 00-450-5955 (004505955) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number HR101V 5 10, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305004505955, part number HR101V 5 10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HR101V 5 10 | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-00-450-5955 (5305004505955) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 004505955 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HR101V 5 10, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305004505955, part number HR101V 5 10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | 0.423 INCHES MINIMUM AND 0.473 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| AASB | FASTENER LENGTH | 1.058 INCHES MINIMUM AND 1.088 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.531 INCHES MINIMUM AND 0.558 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CRSQ | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL |
| MATT | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3A |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| AAUR | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.394 IN. MIN,0.396 IN. MAX DIA,0.092 IN. MIN,0.097 IN. MAX LG FROM TOP OF HEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
