| Part Number : HT239-5-11D | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-030-4658 (5305010304658) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-030-4658 (010304658) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT239511D | |||
Thank you for taking an interest in part number HT239-5-11D, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305010304658, part number HT239-5-11D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT239-5-11D | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-030-4658 (5305010304658) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 010304658 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT239-5-11D, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305010304658, part number HT239-5-11D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-030-4658 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010304658 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT239-5-11D | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.047 INCHES MINIMUM AND 1.094 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.448 INCHES MINIMUM AND 0.477 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.934 INCHES MINIMUM FIRST HOLE AND 0.954 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
