| Part Number : HR216-06-6 | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-198-8124 (5305011988124) | |||
| Item Name : Screw Machine | CAGE Code : 73197 | ||
| NIIN : 01-198-8124 (011988124) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HR216066 | |||
Thank you for taking an interest in part number HR216-06-6, that of which is listed with the description Screw Machine; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305011988124, part number HR216-06-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HR216-06-6 | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-198-8124 (5305011988124) | |||
| Item Name : Screw Machine | CAGE Code : 73197 | ||
| NIIN : 011988124 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HR216-06-6, that of which is listed with the description Screw Machine; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305011988124, part number HR216-06-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-198-8124 Item PartTypeName: SCREW,MACHINE | 5305 | 011988124 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HR216-06-6 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.252 INCHES MINIMUM AND 0.302 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.637 INCHES MINIMUM AND 0.667 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE SET |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
| FEAT | SPECIAL FEATURES | INTERNAL DRIVE RIBBED |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
