| Part Number : TX1026D4-35A | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-481-0078 (5305014810078) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-481-0078 (014810078) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1026D435A | |||
Thank you for taking an interest in part number TX1026D4-35A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305014810078, part number TX1026D4-35A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1026D4-35A | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-481-0078 (5305014810078) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 014810078 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026D4-35A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305014810078, part number TX1026D4-35A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-481-0078 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 014810078 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1026D4-35A | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 2.5980 INCHES MINIMUM AND 2.6280 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.4970 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUH | SPLINE MINOR DIAMETER | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| ANEE | GRIP LENGTH | 2.1780 INCHES MINIMUM AND 2.1980 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
