| Part Number : TX1027C4-2A | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-497-0829 (5305014970829) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-497-0829 (014970829) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1027C42A | |||
Thank you for taking an interest in part number TX1027C4-2A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305014970829, part number TX1027C4-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m health care service center
CAGE Code: 0UTW7 |
2056 company
CAGE Code: 7F967 |
|
2709th af vehicle control group
CAGE Code: 10994 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
4 ld inc
CAGE Code: 0ACW5 |
10zig technology inc
CAGE Code: 49E04 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
3m health care ltd
CAGE Code: U5989 |
|
20th century fiberglass
CAGE Code: 80241 |
200 park inc
CAGE Code: 3CKS7 |
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
3m purification inc
CAGE Code: 15472 |
3dbm co inc
CAGE Code: 31791,62874 |
|
3 l filters ltd
CAGE Code: 37941 |
| Part Number : TX1027C4-2A | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-497-0829 (5305014970829) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 014970829 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1027C4-2A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305014970829, part number TX1027C4-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-497-0829 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014970829 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1170C4-2A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| AASB | Fastener Length | 0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AGAV | End Item Identification | F18 E/F |
| THSD | Thread Series Designator | UNJF |
| AAUR | Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AASL | Head Diameter | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.425 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | BOLT,100 DEGRE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO(125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR),6AL-4V TITANIUM (95 KSI SHEAR) |
| ABQZ | Internal Drive Style | TORX |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| CMLP | Thread Quantity Per Inch | 28 |
| AAUH | Spline Minor Diameter | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| ANEE | Grip Length | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUJ | Spline Major Diameter | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
