| Part Number : HT4027-9D45 | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-507-4373 (5305015074373) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-507-4373 (015074373) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT40279D45 | |||
Thank you for taking an interest in part number HT4027-9D45, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305015074373, part number HT4027-9D45 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4027-9D45 | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-507-4373 (5305015074373) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 015074373 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4027-9D45, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305015074373, part number HT4027-9D45 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-507-4373 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015074373 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4027-9D45 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR | Grip Diameter | 0.5610 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| ASXK | Hole Quantity | 1 |
| AHYM | Nominal Thread Diameter | 0.5625 INCHES |
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | LANDING GEAR |
| BQDM | Hole Type | DRILLED |
| CMLP | Thread Quantity Per Inch | 18 |
| CRHC | Hole Configuration Style | ROUND |
| AAUB | Hole Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABQZ | Internal Drive Style | HIGH-TORQUE |
| AAJF | Thread Direction | RIGHT-HAND |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AASL | Head Diameter | 0.838 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA | Thread Length | 0.906 INCHES NOMINAL |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| AASB | Fastener Length | 3.7035 INCHES MINIMUM AND 3.7335 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| ANEE | Grip Length | 2.8025 INCHES MINIMUM AND 2.8225 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
