| Part Number : TX1026V3-30A | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-512-8275 (5305015128275) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-512-8275 (015128275) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1026V330A | |||
Thank you for taking an interest in part number TX1026V3-30A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305015128275, part number TX1026V3-30A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m united kingdom plc
CAGE Code: K0993,K8767 |
360 tents l l c
CAGE Code: 4CT45 |
|
21st century electronics inc
CAGE Code: 60092 |
2001 micro systemation ab
CAGE Code: SK396 |
|
21st century paramount inc
CAGE Code: 55428 |
3m health care ltd
CAGE Code: U5989 |
|
3m belgium nv
CAGE Code: B2281 |
3m france
CAGE Code: F0347 |
|
28eme groupe geographique
CAGE Code: FAR17 |
1 source electronics inc
CAGE Code: 551K1 |
|
3s group inc
CAGE Code: 07CN0 |
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
|
3d pep
CAGE Code: FB830 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
| Part Number : TX1026V3-30A | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-512-8275 (5305015128275) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 015128275 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026V3-30A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305015128275, part number TX1026V3-30A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-512-8275 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015128275 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11827V3-30A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.189 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASL | HEAD DIAMETER | 0.372 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE | GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| MATT | MATERIAL | TITANIUM OVERALL |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAJD | THREAD CLASS | 3A |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.205 INCHES MINIMUM AND 2.235 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.345 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 32 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
