| Part Number : TX1026C5-7A | Manufacturer : Hi Shear Corporation | ||
| NSN : 5305-01-529-4182 (5305015294182) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-529-4182 (015294182) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TX1026C57A | |||
Thank you for taking an interest in part number TX1026C5-7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305015294182, part number TX1026C5-7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2mb international
CAGE Code: FA7N3 |
3w interface corp
CAGE Code: 4V367 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
28eme groupe geographique
CAGE Code: FAR17 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
3m company communication markets
CAGE Code: 0VGY3 |
|
3dbm co inc
CAGE Code: 31791,62874 |
3m belgium nv
CAGE Code: B2281 |
|
3 m federal systems dept
CAGE Code: 68352 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
360 tents l l c
CAGE Code: 4CT45 |
|
320 matlogpel breda centrale
CAGE Code: H2851 |
3com sas
CAGE Code: F9930 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
| Part Number : TX1026C5-7A | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5305-01-529-4182 (5305015294182) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 015294182 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026C5-7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5305015294182, part number TX1026C5-7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-529-4182 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015294182 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1026C5-7A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 0.907 INCHES MINIMUM AND 0.922 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.6230 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| FEAT | SPECIAL FEATURES | 125 KSI ULTIMATE SHEAR STRENGTH |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
