| Part Number : 3M1043-5H16-46 | Manufacturer : Hi Shear Corporation | ||
| NSN : 5306-01-219-9125 (5306012199125) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 01-219-9125 (012199125) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M10435H1646 | |||
Thank you for taking an interest in part number 3M1043-5H16-46, that of which is listed with the description Bolt Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5306012199125, part number 3M1043-5H16-46 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M1043-5H16-46 | Manufacturer : Hi Shear Corporation | ||
| NSN Number : 5306-01-219-9125 (5306012199125) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 73197 | ||
| NIIN : 012199125 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 3M1043-5H16-46, that of which is listed with the description Bolt Close Tolerance; Manufactured by Hi Shear Corporation and listed alongside the NSN 5306012199125, part number 3M1043-5H16-46 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-219-9125 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 012199125 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11841-5H16-46 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.536 INCHES MINIMUM AND 1.566 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| FEAT | SPECIAL FEATURES | THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B THD; INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE IN UNTHD SHANK; DISTANCE FROM HEAD TO BEGINNING OF INJECTION PORT 0.460 IN. |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
