| Part Number : NX2113PC6 | Manufacturer : Hoffman New Yorker Inc | ||
| NSN : 3130-00-108-0689 (3130001080689) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 31974 | ||
| NIIN : 00-108-0689 (001080689) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number NX2113PC6, that of which is listed with the description Bearing Unit Ball; Manufactured by Hoffman New Yorker Inc and listed alongside the NSN 3130001080689, part number NX2113PC6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NX2113PC6 | Manufacturer : Hoffman New Yorker Inc | ||
| NSN Number : 3130-00-108-0689 (3130001080689) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 31974 | ||
| NIIN : 001080689 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number NX2113PC6, that of which is listed with the description Bearing Unit Ball; Manufactured by Hoffman New Yorker Inc and listed alongside the NSN 3130001080689, part number NX2113PC6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-108-0689 Item PartTypeName: BEARING UNIT,BALL | 3130 | 001080689 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NP27 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJH | TEMP RATING | 275.0 DEG FAHRENHEIT |
| ABTD | MOUNTING SLOT WIDTH | 0.5625 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.8125 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.6875 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.6875 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 5.7500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.2500 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 7.5000 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 2.1250 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.9375 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.1250 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL AND WOOL SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
