| Part Number : 73836 | Manufacturer : Honeywell International Inc | ||
| NSN : 3040-00-213-8508 (3040002138508) | |||
| Item Name : Gearshaft Spur | CAGE Code : 70210 | ||
| NIIN : 00-213-8508 (002138508) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 60541 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 73836, that of which is listed with the description Gearshaft Spur; Manufactured by Honeywell International Inc and listed alongside the NSN 3040002138508, part number 73836 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m co abrasive systems division
CAGE Code: 078Z1 |
5605 n illinois inc
CAGE Code: 089F4 |
|
12 volt shop
CAGE Code: Z0JM2 |
5 11 inc
CAGE Code: 3YEL6 |
|
1spatial ltd
CAGE Code: U3518 |
20 10 products inc
CAGE Code: 09KC9 |
|
3m unitek corporation
CAGE Code: 90444 |
3 m federal systems dept
CAGE Code: 68352 |
|
11 30 elo touchsystems inc
CAGE Code: 1CEX6 |
3 ring inc
CAGE Code: 68310 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
3d pep
CAGE Code: FB830 |
|
3 com/us robotics
CAGE Code: 1B8Q7 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
2m machining and manufacturing
CAGE Code: 6Y604 |
| Part Number : 73836 | Manufacturer : Honeywell International Inc | ||
| NSN Number : 3040-00-213-8508 (3040002138508) | |||
| Item Name : Gearshaft Spur | CAGE Code : 70210 | ||
| NIIN : 002138508 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 73836, that of which is listed with the description Gearshaft Spur; Manufactured by Honeywell International Inc and listed alongside the NSN 3040002138508, part number 73836 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-213-8508 Item PartTypeName: GEARSHAFT,SPUR | 3040 | 002138508 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 73836 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.560 INCHES NOMINAL |
| AJWS | GEAR OUTSIDE DIAMETER | 0.765 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | PLAIN AND SPLINED INVOLUTE |
| AQPL | FACE WIDTH | 0.387 INCHES NOMINAL |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CYES | HARDNESS RATING AND LOCATION | 90.0 ROCKWELL SUPERFICIAL 15-N MINIMUM SHAFT AND 92.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM SHAFT AND 33.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CYET | SHAFT LARGEST DIAMETER | 0.375 INCHES NOMINAL |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | 1.333 INCHES NOMINAL |
| CYEW | SHAFT END SIZE | 0.375 INCHES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
