| Part Number : 364495-2 | Manufacturer : Honeywell International Inc | ||
| NSN : 5310-01-317-1805 (5310013171805) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 99193 | ||
| NIIN : 01-317-1805 (013171805) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3644952 | |||
Thank you for taking an interest in part number 364495-2, that of which is listed with the description Nut Plain Hexagon; Manufactured by Honeywell International Inc and listed alongside the NSN 5310013171805, part number 364495-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 364495-2 | Manufacturer : Honeywell International Inc | ||
| NSN Number : 5310-01-317-1805 (5310013171805) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 99193 | ||
| NIIN : 013171805 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 364495-2, that of which is listed with the description Nut Plain Hexagon; Manufactured by Honeywell International Inc and listed alongside the NSN 5310013171805, part number 364495-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-317-1805 Item Description: Nut Plain Hexagon | 5310 | 013171805 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 364495-2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| ACTA | NUT STYLE | HEXAGON |
| CRSQ | COUNTERSINK ANGLE | 118.0 DEGREES MINIMUM AND 122.0 DEGREES MAXIMUM BOTH ENDS |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AGGP | DRILLED HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| ADEA | NUT HEIGHT | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL |
| AAJD | THREAD CLASS | 3B |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| BZRR | THREAD SERIES | UNF |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
