| Part Number : 3161436-1 | Manufacturer : Honeywell International Inc | ||
| NSN : 5315-00-280-4139 (5315002804139) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 99193 | ||
| NIIN : 00-280-4139 (002804139) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 31614361 | |||
Thank you for taking an interest in part number 3161436-1, that of which is listed with the description Pin Grooved Headed; Manufactured by Honeywell International Inc and listed alongside the NSN 5315002804139, part number 3161436-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3161436-1 | Manufacturer : Honeywell International Inc | ||
| NSN Number : 5315-00-280-4139 (5315002804139) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 99193 | ||
| NIIN : 002804139 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 3161436-1, that of which is listed with the description Pin Grooved Headed; Manufactured by Honeywell International Inc and listed alongside the NSN 5315002804139, part number 3161436-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-280-4139 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 002804139 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3161436-1 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT COUNTERSUNK (INCLUDED ANGLE LESS THAN 135 DEG) |
| ABMZ | DIAMETER | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.377 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| CRMG | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| CTPW | HEAD COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 347 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
