| Part Number : 2040891-2 | Manufacturer : Honeywell International Inc | ||
| NSN : 5365-01-131-5658 (5365011315658) | |||
| Item Name : Shim | CAGE Code : 70210 | ||
| NIIN : 01-131-5658 (011315658) | |||
| FSC Code : 5365 Bushings Rings Shims and Spacers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20349 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 20408912 | |||
Thank you for taking an interest in part number 2040891-2, that of which is listed with the description Shim; Manufactured by Honeywell International Inc and listed alongside the NSN 5365011315658, part number 2040891-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2040891-2 | Manufacturer : Honeywell International Inc | ||
| NSN Number : 5365-01-131-5658 (5365011315658) | |||
| Item Name : Shim | CAGE Code : 70210 | ||
| NIIN : 011315658 | |||
| FSC CODE : 5365 Bushings Rings Shims and Spacers | |||
Thank you for taking an interest in part number 2040891-2, that of which is listed with the description Shim; Manufactured by Honeywell International Inc and listed alongside the NSN 5365011315658, part number 2040891-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-01-131-5658 Item PartTypeName: SHIM | 5365 | 011315658 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2040891-2 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.210 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.520 INCHES NOMINAL |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.240 INCHES NOMINAL |
| ADVJ | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.250 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 2 |
| CQCF | CONSTRUCTION | ONE-PIECE |
| MATT | MATERIAL | STEEL COMP 301 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,TEMPER 1/4 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
