| Part Number : 966034-38 | Manufacturer : Honeywell International Inc | ||
| NSN : 5905-01-019-5055 (5905010195055) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 94580 | ||
| NIIN : 01-019-5055 (010195055) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 96603438 | |||
Thank you for taking an interest in part number 966034-38, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Honeywell International Inc and listed alongside the NSN 5905010195055, part number 966034-38 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3h industries inc
CAGE Code: 60754 |
3m unitek corporation
CAGE Code: 90444 |
|
3d pep
CAGE Code: FB830 |
4 ld inc
CAGE Code: 0ACW5 |
|
3m health care ltd
CAGE Code: U5989 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
3m purification pty limited
CAGE Code: Z5295 |
4 sure com inc
CAGE Code: 1LDH8 |
|
2001 humana press inc
CAGE Code: 34CH3 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
21st century optics inc
CAGE Code: 0TN38 |
3m nederland b v
CAGE Code: H1248 |
|
2415779 ontario inc
CAGE Code: L09L7 |
3d safety services pty ltd
CAGE Code: Z2JB4 |
|
28eme groupe geographique
CAGE Code: FAR17 |
| Part Number : 966034-38 | Manufacturer : Honeywell International Inc | ||
| NSN Number : 5905-01-019-5055 (5905010195055) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 94580 | ||
| NIIN : 010195055 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 966034-38, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Honeywell International Inc and listed alongside the NSN 5905010195055, part number 966034-38 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-019-5055 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 010195055 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MILR39015-2 | B | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| ABJT | TERMINAL LENGTH | 0.187 INCHES MINIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.540 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.230 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 8280.0 MINIMUM AND 13680.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.052 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 8280.0 MINIMUM AND 13680.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACE GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
