1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

WP1 1 8-141 part number of Honeywell Sensing And Control - Order Now!

Part Number : WP1 1 8-141 Manufacturer : Honeywell Sensing And Control
NSN : 5905-00-905-5759 (5905009055759)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 94603
NIIN : 00-905-5759  (009055759)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37406
NCB Code : 00 Country : USA
Alternate P/N:  WP118141

Thank you for taking an interest in part number WP1 1 8-141, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Honeywell Sensing And Control and listed alongside the NSN 5905009055759, part number WP1 1 8-141 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part WP1 1 8-141 With Different Manufacturers

Recently Viewed Parts
3SGF80400
RFQ

WP1 1 8-141 part number of Honeywell Sensing And Control - Order Now!

Part Number : WP1 1 8-141 Manufacturer : Honeywell Sensing And Control
NSN Number : 5905-00-905-5759 (5905009055759)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 94603
NIIN : 009055759
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number WP1 1 8-141, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Honeywell Sensing And Control and listed alongside the NSN 5905009055759, part number WP1 1 8-141 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number WP1 1 8-141

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number WP1 1 8-141 with NSN 5905-00-905-5759, 5905009055759

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-905-5759

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050090557590N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
WP11-8-150000HMS21CA

Characteristics Data of NSN 5905-00-905-5759, 5905009055759

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABPAUNDERCUT DIAMETER1.000 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0620 INCHES NOMINAL
ABPMBODY DIAMETER1.125 INCHES NOMINAL
ABWVSHAFT DIAMETER0.2496 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM
ABXFSHAFT LENGTH0.875 INCHES NOMINAL
ADAQBODY LENGTH0.703 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1.1250 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 MINIMUM
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCCELECTRICAL RESISTANCE PER SECTION15.0 KILOHMS SINGLE SECTION
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION179.0 SINGLE SECTION AND 225.0 SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS3.0 FREE AIR SINGLE SECTION
CRJSFIXED TAP QUANTITY PER SECTION2 SINGLE SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TESTTEST DATA DOCUMENT80249-730197 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY5 TURRET

Frequently Asked Questions (FAQ): WP1 1 8-141 NSN Part

What Type of Item Is Part Number WP1 1 8-141?
  • Part Number WP1 1 8-141 is an "Resistor Variable Wire Wound Non" manufactured by Honeywell Sensing And Control Managed with the NSN 5905-00-905-5759. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number WP1 1 8-141?
  • Resistor Variable Wire Wound Non To receive a competitive quote for items with the part number WP1 1 8-141, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 94603 Important When Purchasing Part Number WP1 1 8-141?
  • CAGE Code 94603 signifies Honeywell Sensing And Control Managed as the manufacturer of Part Number WP1 1 8-141, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-00-905-5759 Paired with Part Number WP1 1 8-141?
  • Part Number WP1 1 8-141 is the identification assigned to the item by Honeywell Sensing And Control Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-00-905-5759 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up