| Part Number : 845-0430 | Manufacturer : Hope Imaging Corporation | ||
| NSN : 3020-01-281-4251 (3020012814251) | |||
| Item Name : Gear Spur | CAGE Code : 54192 | ||
| NIIN : 01-281-4251 (012814251) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 8450430 | |||
Thank you for taking an interest in part number 845-0430, that of which is listed with the description Gear Spur; Manufactured by Hope Imaging Corporation and listed alongside the NSN 3020012814251, part number 845-0430 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
485 engineering installation group
CAGE Code: 13676,14943 |
200 park inc
CAGE Code: 3CKS7 |
|
3 v fastener co inc
CAGE Code: 1ER65 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
1 source electronics inc
CAGE Code: 551K1 |
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
21st century optics inc
CAGE Code: 0TN38 |
|
3m nederland b v
CAGE Code: H1248 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
3m medical imaging
CAGE Code: 0ZRE5 |
3m quante ag telekommunikation
CAGE Code: D2771 |
|
21st century enterprises inc
CAGE Code: 56589 |
21st century electronics inc
CAGE Code: 60092 |
|
3m france
CAGE Code: F0347 |
| Part Number : 845-0430 | Manufacturer : Hope Imaging Corporation | ||
| NSN Number : 3020-01-281-4251 (3020012814251) | |||
| Item Name : Gear Spur | CAGE Code : 54192 | ||
| NIIN : 012814251 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 845-0430, that of which is listed with the description Gear Spur; Manufactured by Hope Imaging Corporation and listed alongside the NSN 3020012814251, part number 845-0430 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-281-4251 Item PartTypeName: GEAR,SPUR | 3020 | 012814251 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 845-0430 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGAV | END ITEM IDENTIFICATION | RC COLOR PROCESSOR |
| AGJS | PITCH DIAMETER | 1.2500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 20 |
| ANTP | BORE STYLE | D BOTH ENDS |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 3 PLAIN AXIALLY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.368 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.500 INCHES |
| CWSF | NOMINAL RADIUS | 0.125 INCHES BOTH ENDS |
| CWSK | NOMINAL DISTANCE FROM FLAT TO RADIAL CENTER | 0.056 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.093 INCHES AXIALLY THROUGH HUB,FIRST END |
| FEAT | SPECIAL FEATURES | HOLES ARE EQL SPCD 120 DEG APART ON .420 DIA. |
| MATT | MATERIAL | PLASTIC OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
