| Part Number : 3M1170V6-10A | Manufacturer : Houston Precision Fastener L L C | ||
| NSN : 5305-01-628-4505 (5305016284505) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 1VSL7 | ||
| NIIN : 01-628-4505 (016284505) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M1170V610A | |||
Thank you for taking an interest in part number 3M1170V6-10A, that of which is listed with the description Screw Close Tolerance; Manufactured by Houston Precision Fastener L L C and listed alongside the NSN 5305016284505, part number 3M1170V6-10A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M1170V6-10A | Manufacturer : Houston Precision Fastener L L C | ||
| NSN Number : 5305-01-628-4505 (5305016284505) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 1VSL7 | ||
| NIIN : 016284505 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M1170V6-10A, that of which is listed with the description Screw Close Tolerance; Manufactured by Houston Precision Fastener L L C and listed alongside the NSN 5305016284505, part number 3M1170V6-10A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-628-4505 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016284505 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11845V6-10A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.578 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.218 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.5504 INCHES MINIMUM AND 0.5604 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.077 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| ANEE | GRIP LENGTH | 0.625 INCHES NOMINAL |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | -0.2175 TO 0.2175 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - 6AL-4V TITANIUM (95 KKSI SHEAR) |
| MATT | MATERIAL | TITANIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
