Part Number : MODEL 6995 MK II | Manufacturer : Howell Laboratories Inc | ||
NSN : 4440-01-477-5145 (4440014775145) | |||
Item Name : Dehydrator Unit Non | CAGE Code : 22501 | ||
NIIN : 01-477-5145 (014775145) | |||
FSC Code : 4440 Driers Dehydrators And Anhydrators | |||
FSG Code : 44 Furnace-Steam Plant-Drying Equip Nuclear Reactors | |||
INC Code : 20530 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number MODEL 6995 MK II, that of which is listed with the description Dehydrator Unit Non; Manufactured by Howell Laboratories Inc and listed alongside the NSN 4440014775145, part number MODEL 6995 MK II is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : MODEL 6995 MK II | Manufacturer : Howell Laboratories Inc | ||
NSN Number : 4440-01-477-5145 (4440014775145) | |||
Item Name : Dehydrator Unit Non | CAGE Code : 22501 | ||
NIIN : 014775145 | |||
FSC CODE : 4440 Driers Dehydrators And Anhydrators |
Thank you for taking an interest in part number MODEL 6995 MK II, that of which is listed with the description Dehydrator Unit Non; Manufactured by Howell Laboratories Inc and listed alongside the NSN 4440014775145, part number MODEL 6995 MK II is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
AWJN | III UNPACKAGED UNIT WEIGHT | 400.000 POUNDS |
AGAV | III END ITEM IDENTIFICATION | DEHYDRATOR, MEMBRANE MDL 7150-G501 |
FEAT | SPECIAL FEATURES | OUTLET CAPACITY: 30 SCFM; INLET AIR CONDITIONS (DEFINED BY SPECIFICATION): 80-125 PSIG, 50 DEGREES F. TO 122 DEGREES F, MAXIMUM DEW POINT OF 60 DEGREES F AT 80 PSIG; OUTLET AIR CONDITIONS: 70-125 PSIG, MAXIMUM DEW POINT OF -40 DEGREES F AT 80 PSIG. PRESSURE NOT MORE THAN 10 PSIG BELOW INLET; ELECTRICAL REQUIREMENTS: 115 VAC, 60 HZ, 1 PHASE, 0.5 AMPERE (FOR HUMIDITY MONITOR ONLY); DIMENSIONS: 36""W X 48""H X 18""D; INAVY: MEMBRANE DEHYDRATOR; ADDITIONAL INFORMATION MAY BE FOUND VIA THE INTERNET AT WWW.HOWELLLABS.COM |
AZTK | BODY OVERALL HEIGHT | 48.000 INCHES NOMINAL |
AZTL | BODY OVERALL LENGTH | 18.000 INCHES NOMINAL |
AZTM | BODY OVERALL WIDTH | 36.000 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote