| Part Number : T1444 | Manufacturer : Howmet Corporation | ||
| NSN : 9540-00-148-4295 (9540001484295) | |||
| Item Name : Angle Structural | CAGE Code : 03462 | ||
| NIIN : 00-148-4295 (001484295) | |||
| FSC Code : 9540 Structural Shapes Nonferrous Base Metal | |||
| FSG Code : 95 Metal Bars Sheets and Shapes | |||
| INC Code : 37017 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number T1444, that of which is listed with the description Angle Structural; Manufactured by Howmet Corporation and listed alongside the NSN 9540001484295, part number T1444 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : T1444 | Manufacturer : Howmet Corporation | ||
| NSN Number : 9540-00-148-4295 (9540001484295) | |||
| Item Name : Angle Structural | CAGE Code : 03462 | ||
| NIIN : 001484295 | |||
| FSC CODE : 9540 Structural Shapes Nonferrous Base Metal | |||
Thank you for taking an interest in part number T1444, that of which is listed with the description Angle Structural; Manufactured by Howmet Corporation and listed alongside the NSN 9540001484295, part number T1444 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 9540-00-148-4295 Item PartTypeName: ANGLE,STRUCTURAL | 9540 | 001484295 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T3612 | 1 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABKW | OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 1.000 INCHES NOMINAL |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| ADXL | LEFT SIDE FLANGE THICKNESS | 0.094 INCHES NOMINAL0.094 INCHES NOMINAL |
| AGTA | BASIC SHAPE STYLE | ANGLE |
| AJGL | FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.125 INCHES NOMINAL |
| AJGP | BASE FLANGE THICKNESS | 0.094 INCHES NOMINAL |
| AJJB | FIRST TIP RADIUS | 0.094 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.214 POUNDS PER LINEAR FOOT |
| CMZY | FIRST TIP STYLE | RIGHT QUARTER RADIUSRIGHT QUARTER RADIUS |
| CMZZ | SECOND TIP RADIUS | 0.094 INCHES NOMINAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| CNQK | SECOND TIP STYLE | UPPER RADIUS |
| CQHP | LEFT INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
