| Part Number : TX1026V412A | Manufacturer : Huck International Inc | ||
| NSN : 5305-01-462-2726 (5305014622726) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 17446 | ||
| NIIN : 01-462-2726 (014622726) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number TX1026V412A, that of which is listed with the description Screw Close Tolerance; Manufactured by Huck International Inc and listed alongside the NSN 5305014622726, part number TX1026V412A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : TX1026V412A | Manufacturer : Huck International Inc | ||
| NSN Number : 5305-01-462-2726 (5305014622726) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 17446 | ||
| NIIN : 014622726 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number TX1026V412A, that of which is listed with the description Screw Close Tolerance; Manufactured by Huck International Inc and listed alongside the NSN 5305014622726, part number TX1026V412A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-462-2726 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014622726 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1169V4-12A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANEE | GRIP LENGTH | 0.563 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.220 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB | FASTENER LENGTH | 1.160 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AASU | HEAD HEIGHT | 0.110 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | 0.157 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | USED ON FA-18 E&F |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
