| Part Number : OBP-T08-08 | Manufacturer : Huck International Inc | ||
| NSN : 5320-01-461-2943 (5320014612943) | |||
| Item Name : Rivetblind | CAGE Code : 17446 | ||
| NIIN : 01-461-2943 (014612943) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: OBPT0808 | |||
Thank you for taking an interest in part number OBP-T08-08, that of which is listed with the description Rivetblind; Manufactured by Huck International Inc and listed alongside the NSN 5320014612943, part number OBP-T08-08 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : OBP-T08-08 | Manufacturer : Huck International Inc | ||
| NSN Number : 5320-01-461-2943 (5320014612943) | |||
| Item Name : Rivetblind | CAGE Code : 17446 | ||
| NIIN : 014612943 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number OBP-T08-08, that of which is listed with the description Rivetblind; Manufactured by Huck International Inc and listed alongside the NSN 5320014612943, part number OBP-T08-08 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-461-2943 Item PartTypeName: RIVET,BLIND | 5320 | 014612943 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| OBP-T08-08 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | 0.400 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 1, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE MECHANICAL LOCK QQ-P-416, TYPE 2, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE QQ-P-416, TYPE 1, CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE STEM |
| SFTT | SURFACE TREATMENT | CADMIUM OR ALUMINUM MECHANICAL LOCK CADMIUM OR ALUMINUM SLEEVE CADMIUM OR ALUMINUM STEM |
| CQSX | SHEAR STRENGTH | 5900 SINGLE POUNDS PER SQUARE INCH |
| CQBC | MINIMUM TENSILE STRENGTH | 3650 POUNDS PER SQUARE INCH |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BLIND BOLT FASTENER, HIGH STRENGTH, PULL-TYPE, POSITIVE MECHANICAL LOCK,PROTRUDING HEAD |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| AAZE | SHANK DIAMETER | 0.250 INCHES NOMINAL |
| AAZF | SHANK STYLE | STRAIGHT |
| AASB | FASTENER LENGTH | 0.719 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OR IRON ALLOY 660 MECHANICAL LOCK STEEL COMP 4027 OR STEEL COMP 4037 SLEEVE STEEL COMP 8740 STEM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| ANEE | GRIP LENGTH | 0.469 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
