| Part Number : 58712 | Manufacturer : Hydro Aire Inc | ||
| NSN : 3040-00-844-7772 (3040008447772) | |||
| Item Name : Shaft Shouldered | CAGE Code : 81982 | ||
| NIIN : 00-844-7772 (008447772) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 22914 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 58712, that of which is listed with the description Shaft Shouldered; Manufactured by Hydro Aire Inc and listed alongside the NSN 3040008447772, part number 58712 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 58712 | Manufacturer : Hydro Aire Inc | ||
| NSN Number : 3040-00-844-7772 (3040008447772) | |||
| Item Name : Shaft Shouldered | CAGE Code : 81982 | ||
| NIIN : 008447772 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 58712, that of which is listed with the description Shaft Shouldered; Manufactured by Hydro Aire Inc and listed alongside the NSN 3040008447772, part number 58712 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-844-7772 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 008447772 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 58712 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| ABHP | OVERALL LENGTH | 1.606 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.4650 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.270 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.2225 INCHES MINIMUM AND 0.2240 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 0.2083 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.4650 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.320 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.2225 INCHES MINIMUM AND 0.2240 INCHES MAXIMUM |
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.2083 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 8 |
| BDSQ | FIRST END SPLINE QUANTITY | 10 |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| CSPY | LARGEST STEP DIAMETER | 0.465 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 4620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493,COMP 4620 MIL SPEC SINGLE MATERIAL RESPONSE |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.1855 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.1855 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
