| Part Number : HC-10-4A | Manufacturer : Hydro Craft Inc | ||
| NSN : 5340-01-259-0502 (5340012590502) | |||
| Item Name : Clamp Block | CAGE Code : 23619 | ||
| NIIN : 01-259-0502 (012590502) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 37415 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HC104A | |||
Thank you for taking an interest in part number HC-10-4A, that of which is listed with the description Clamp Block; Manufactured by Hydro Craft Inc and listed alongside the NSN 5340012590502, part number HC-10-4A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HC-10-4A | Manufacturer : Hydro Craft Inc | ||
| NSN Number : 5340-01-259-0502 (5340012590502) | |||
| Item Name : Clamp Block | CAGE Code : 23619 | ||
| NIIN : 012590502 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number HC-10-4A, that of which is listed with the description Clamp Block; Manufactured by Hydro Craft Inc and listed alongside the NSN 5340012590502, part number HC-10-4A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-259-0502 Item PartTypeName: CLAMP,BLOCK | 5340 | 012590502 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 44300-506 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.500 INCHES MINIMUM AND 5.780 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.915 INCHES MINIMUM AND 1.045 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.400 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 3 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.500 INCHES NOMINAL |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 3.000 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.670 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| CWTD | CLAMPING HOLE QUANTITY | 4 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.280 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.580 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| CWYS | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | 4.500 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY2,CL1 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
