| Part Number : 7108115-3 | Manufacturer : Illinois Tool Works Inc | ||
| NSN : 3040-01-494-3543 (3040014943543) | |||
| Item Name : Gearshaft Helical | CAGE Code : 5G804 | ||
| NIIN : 01-494-3543 (014943543) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 60539 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 71081153 | |||
Thank you for taking an interest in part number 7108115-3, that of which is listed with the description Gearshaft Helical; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 3040014943543, part number 7108115-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7108115-3 | Manufacturer : Illinois Tool Works Inc | ||
| NSN Number : 3040-01-494-3543 (3040014943543) | |||
| Item Name : Gearshaft Helical | CAGE Code : 5G804 | ||
| NIIN : 014943543 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 7108115-3, that of which is listed with the description Gearshaft Helical; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 3040014943543, part number 7108115-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-494-3543 Item PartTypeName: GEARSHAFT,HELICAL | 3040 | 014943543 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H832-1662-3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-DOD-F-24669/1 GOVERNMENT SPECIFICATION |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE INPUT |
| ABXF | SHAFT LENGTH | 15.997 INCHES MINIMUM AND 16.047 INCHES MAXIMUM |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CYEQ | SHAFT MATERIAL | STEEL COMP E9310 |
| CYEV | LONGER SHAFT SEGMENT LENGTH | 6.907 INCHES MINIMUM AND 6.937 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 15.997 INCHES MINIMUM AND 16.047 INCHES MAXIMUM |
| CYER | GEAR MATERIAL | STEEL COMP E9310 |
| CYET | SHAFT LARGEST DIAMETER | 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEW | SHAFT END SIZE | 0.999 INCHES AND 1.2509 INCHES |
| AGAV | III END ITEM IDENTIFICATION | GEARBOX, RAMMER DRIVE |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1; NUMBER OF THREAD STARTS 2; MATES WITH P/N H832-1662-4 (CAGE 96169); MATCHED PAIR FOR P/N H832-1662-3 AND 4 NSN 3020-01-494-0562; NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053; USED ON NSSN CLASS SUBMARINE |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNM | TOOTH DIRECTION | RIGHT |
| AJWS | GEAR OUTSIDE DIAMETER | 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM |
| ANJS | SHAFT END TYPE | CIRCULAR GROOVED, KEYWAY WOODRUFF AND BEARING SEAT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
