| Part Number : 8-52-89 | Manufacturer : Illinois Tool Works Inc | ||
| NSN : 3130-01-226-3721 (3130012263721) | |||
| Item Name : Housingbearingunit | CAGE Code : 32386 | ||
| NIIN : 01-226-3721 (012263721) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30559 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 85289 | |||
Thank you for taking an interest in part number 8-52-89, that of which is listed with the description Housingbearingunit; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 3130012263721, part number 8-52-89 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8-52-89 | Manufacturer : Illinois Tool Works Inc | ||
| NSN Number : 3130-01-226-3721 (3130012263721) | |||
| Item Name : Housingbearingunit | CAGE Code : 32386 | ||
| NIIN : 012263721 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 8-52-89, that of which is listed with the description Housingbearingunit; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 3130012263721, part number 8-52-89 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-226-3721 Item PartTypeName: HOUSING,BEARING UNIT | 3130 | 012263721 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8-52-89 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 5.0000 INCHES MINIMUM AND 5.0010 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 11.300 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 13.938 INCHES MINIMUM AND 14.062 INCHES MAXIMUM |
| AGKL | LUBRICATION FITTING TYPE | FLUSH |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 5.650 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| FEAT | SPECIAL FEATURES | COUNTERBORED APERTURE; 2 ADDITIONAL MOUNTING HOLES IN BASE; 4 EQUALLY SPACED 0.531 DIA MOUNTING HOLES ON A 6.000 DIA BOLT CIRCLE |
| MATT | MATERIAL | STEEL COMP 304 OR STEEL COMP 1009 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-698 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
