| Part Number : 3153407 | Manufacturer : Illinois Tool Works Inc | ||
| NSN : 5305-01-470-7020 (5305014707020) | |||
| Item Name : Screw Tapping | CAGE Code : 83910 | ||
| NIIN : 01-470-7020 (014707020) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 41756 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 3153407, that of which is listed with the description Screw Tapping; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5305014707020, part number 3153407 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3153407 | Manufacturer : Illinois Tool Works Inc | ||
| NSN Number : 5305-01-470-7020 (5305014707020) | |||
| Item Name : Screw Tapping | CAGE Code : 83910 | ||
| NIIN : 014707020 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3153407, that of which is listed with the description Screw Tapping; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5305014707020, part number 3153407 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-470-7020 Item PartTypeName: SCREW,TAPPING | 5305 | 014707020 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3153407 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASU | HEAD HEIGHT | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| AATC | EXTENDED WASHER DIAMETER | 0.398 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1022 OVERALL |
| CRGF | NONMACHINE THREAD STYLE | CONE POINT (TYPE BP) |
| AASB | FASTENER LENGTH | 1.2032 INCHES MINIMUM AND 1.2968 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | RADAR |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| CTYF | NONMACHINE NOMINAL THREAD DIAMETER | 0.260 INCHES |
| AASK | HEAD STYLE | CHAMFER FLANGE |
| FEAT | SPECIAL FEATURES | ITEM IS A SELF-TAPPING, REMOVABLE, CONCRETE ANCHOR WITH A SPECIALLY DESIGNED TWO LEAD THREAD, TWO THREADS OF UNEQUAL SIZE, LARGER DIAMETER THREAD IS NOTCHED AT INTERVALS ALONG ITS LENGTH TO FACILITATE TAPPING INTO MASONRY MATERIALS; A SPECIALLY-SIZED CARBIDE-TIPPED DRILL BIT IS SUPLIED WITH EACH BOX OF ANCHORS FOR HOLE PREPARATION; INSTALLATION HOLE SHOULDBE DRILLED TO NOT LESS THAN ONE-QUARTER INCH DEEPER THAN THE ANCHOR PENETRATION INTO THE MASONRY; THE FINISH HAS A PROPRIETARY SYNTHETIC POLYMER COATING; THE END ITEM IDENTIFICATION IS THE NEXT GENERATION RADAR (NEXRAD), WHICH IS USED BY THE NATIONAL WEATHER SERVICE (NWS) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
