| Part Number : 1397000 | Manufacturer : Illinois Tool Works Inc | ||
| NSN : 5305-01-605-4408 (5305016054408) | |||
| Item Name : Screw Self Drilling | CAGE Code : 83910 | ||
| NIIN : 01-605-4408 (016054408) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 38031 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 1397000, that of which is listed with the description Screw Self Drilling; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5305016054408, part number 1397000 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1397000 | Manufacturer : Illinois Tool Works Inc | ||
| NSN Number : 5305-01-605-4408 (5305016054408) | |||
| Item Name : Screw Self Drilling | CAGE Code : 83910 | ||
| NIIN : 016054408 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 1397000, that of which is listed with the description Screw Self Drilling; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5305016054408, part number 1397000 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-605-4408 Item PartTypeName: SCREW,SELF-DRILLING | 5305 | 016054408 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 882519071 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.50 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.30 INCHES NOMINAL |
| ABQJ | POINT STYLE | SELF-DRILLING |
| ABQZ | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
| AGAV | END ITEM IDENTIFICATION | 4320-01-533-6417 |
| AHYM | NOMINAL THREAD DIAMETER | 0.19 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 16.0 |
| CQBC | MINIMUM TENSILE STRENGTH | 1936 POUNDS PER SQUARE INCH |
| CRGF | NONMACHINE THREAD STYLE | SELF DRILLING |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SELF-DRILLING FASTENER |
| FEAT | SPECIAL FEATURES | DRILLING POINT IS STYLE TEK3 |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
