| Part Number : R2528 | Manufacturer : Illinois Tool Works Inc | ||
| NSN : 5905-01-127-7537 (5905011277537) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 04426 | ||
| NIIN : 01-127-7537 (011277537) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number R2528, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5905011277537, part number R2528 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m medical imaging
CAGE Code: 0ZRE5 |
3m alaska
CAGE Code: 0NZU5 |
|
4 ld inc
CAGE Code: 0ACW5 |
3m norge a s
CAGE Code: N0447 |
|
3nity products llc
CAGE Code: 8HDM8 |
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
|
17th st photo supply inc
CAGE Code: 1VV61 |
3075109 canada inc
CAGE Code: L09L0 |
|
3m deutschland gmbh
CAGE Code: D2607 |
21st century electronics inc
CAGE Code: 60092 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
2connect it b v
CAGE Code: HG221 |
|
3m unitek corporation
CAGE Code: 90444 |
3d energy pty ltd
CAGE Code: Z0UA3 |
|
3dfx interactive
CAGE Code: KA796 |
| Part Number : R2528 | Manufacturer : Illinois Tool Works Inc | ||
| NSN Number : 5905-01-127-7537 (5905011277537) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 04426 | ||
| NIIN : 011277537 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number R2528, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5905011277537, part number R2528 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-127-7537 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 011277537 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R2528 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | 15.400 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARB | UNABLE TO DECODE | UNABLE TO DECODE |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| ABJT | TERMINAL LENGTH | 0.438 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.062 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.531 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.562 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.719 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 8.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AFWW | TERMINAL WIDTH | 0.140 INCHES MINIMUM |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL |
| CBME | CUBIC MEASURE | 0.483 CUBIC INCHES |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| PKWT | UNPACKAGED UNIT WEIGHT | 16.500 GRAMS |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| TEST | TEST DATA DOCUMENT | 27963-85570200 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
