| Part Number : SW-281-7 | Manufacturer : Illinois Tool Works Inc | ||
| NSN : 5930-01-020-2517 (5930010202517) | |||
| Item Name : Switch Rotary | CAGE Code : 04426 | ||
| NIIN : 01-020-2517 (010202517) | |||
| FSC Code : 5930 Switches | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 02134 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: SW2817 | |||
Thank you for taking an interest in part number SW-281-7, that of which is listed with the description Switch Rotary; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5930010202517, part number SW-281-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SW-281-7 | Manufacturer : Illinois Tool Works Inc | ||
| NSN Number : 5930-01-020-2517 (5930010202517) | |||
| Item Name : Switch Rotary | CAGE Code : 04426 | ||
| NIIN : 010202517 | |||
| FSC CODE : 5930 Switches | |||
Thank you for taking an interest in part number SW-281-7, that of which is listed with the description Switch Rotary; Manufactured by Illinois Tool Works Inc and listed alongside the NSN 5930010202517, part number SW-281-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-020-2517 Item PartTypeName: SWITCH,ROTARY | 5930 | 010202517 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | S | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SW-281-7 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.245 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.255 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.123 INCHES MINIMUM SINGLE ACTUATOR AND 0.127 INCHES MAXIMUM SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.780 INCHES MINIMUM SINGLE ACTUATOR AND 0.840 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 0.495 INCHES MINIMUM AND 0.512 INCHES MAXIMUM |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDC | NONTURN DEVICE TYPE | FLATTED BUSHING AT 3:00 OCLOCKFLATTED BUSHING AT 9:00 OCLOCK |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 3 SINGLE SECTION REAR |
| AKPY | THROW QUANTITY | 2 SINGLE SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL28.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL6.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 60.0 DEGREES SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL1.0 AMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL1.0 AMPERES RESISTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACTS AND TOTOR BLADES SILVER AND CONTACT AND ROTOR BLADE SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | SILVER AND GOLD |
| STYL | STYLE DESIGNATOR | MINIATURE,BUSHING MOUNT |
| THSD | THREAD SERIES DESIGNATOR | UNF SINGLE MOUNTING FACILITY |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
