| Part Number : 5305PL0784001 | Manufacturer : Inspektorat Wsparcia Sil Zbrojnych | ||
| NSN : 5305-01-260-9826 (5305012609826) | |||
| Item Name : Setscrew | CAGE Code : 9009H | ||
| NIIN : 01-260-9826 (012609826) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06672 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 5305PL0784001, that of which is listed with the description Setscrew; Manufactured by Inspektorat Wsparcia Sil Zbrojnych and listed alongside the NSN 5305012609826, part number 5305PL0784001 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5305PL0784001 | Manufacturer : Inspektorat Wsparcia Sil Zbrojnych | ||
| NSN Number : 5305-01-260-9826 (5305012609826) | |||
| Item Name : Setscrew | CAGE Code : 9009H | ||
| NIIN : 012609826 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 5305PL0784001, that of which is listed with the description Setscrew; Manufactured by Inspektorat Wsparcia Sil Zbrojnych and listed alongside the NSN 5305012609826, part number 5305PL0784001 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-260-9826 Item PartTypeName: SETSCREW | 5305 | 012609826 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2007669-1 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.062 INCHES NOMINAL |
| AAUY | POINT LENGTH | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CWDK | POINT CHAMFER ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | ITEM IS F-16 LANDING GEAR SPECIFIC |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
