1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   Inspektorat Wsparcia Sil Zbrojnych   //  5305PL0784918

5305PL0784918 part number of Inspektorat Wsparcia Sil Zbrojnych - Order Now!

Part Number : 5305PL0784918 Manufacturer : Inspektorat Wsparcia Sil Zbrojnych
NSN : 5305-01-346-2268 (5305013462268)
Item Name : Screw Close Tolerance CAGE Code : 9009H
NIIN : 01-346-2268  (013462268)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA

Thank you for taking an interest in part number 5305PL0784918, that of which is listed with the description Screw Close Tolerance; Manufactured by Inspektorat Wsparcia Sil Zbrojnych and listed alongside the NSN 5305013462268, part number 5305PL0784918 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
PB-00440-LENS-03
Pall Aeropower Corporation
Lens Light
NSN: 6210015299641
CAGE Code: 60047
RFQ
M15-00316W PIECE 18
Parker Hannifin Corporation
Shim
NSN: 5365011942923
CAGE Code: 9F512
RFQ

Related NSN Components to 5305PL0784918

530-003
Erie Specialty Products Inc
NSN: 5910-01-051-3203
CAGE Code: 72982 		530-0002-01
Athena Gtx Inc
NSN: 6130-01-674-2798
CAGE Code: 3N0A2
530-000428-000
Insitu Inc
NSN: 2590-01-702-8876
CAGE Code: 02FP7 		530-000471-000
Insitu Inc
NSN: 1680-01-661-8839
CAGE Code: 02FP7
530-001
Sprague Goodman Electronics Inc
NSN: 5910-00-438-0401
CAGE Code: 52769 		530-0026
Continental Electronics Corp
NSN: 6685-00-175-6932
CAGE Code: 52151
530-000
Sprague Goodman Electronics Inc
NSN: 5910-00-244-8375
CAGE Code: 52769 		530-000279-002
Insitu Inc
NSN: 1680-01-645-8996
CAGE Code: 02FP7
530-00-322
Arrow Safety Device Co
NSN: 6220-00-484-5936
CAGE Code: 20984 		530-000318-000
Insitu Inc
NSN: 1680-01-647-8780
CAGE Code: 02FP7
530-000273-012
Insitu Inc
NSN: 5963-01-630-2152
CAGE Code: 02FP7 		530-000273-002
Insitu Inc
NSN: 5963-01-630-9455
CAGE Code: 02FP7
530-000036-000
Insitu Inc
NSN: 1560-01-653-6413
CAGE Code: 02FP7 		530-000233-000
Insitu Inc
NSN: 9535-01-710-7733
CAGE Code: 02FP7
530-000298-001
Insitu Inc
NSN: 1680-01-647-8777
CAGE Code: 02FP7 		530-00022
Deep Sea Power And Light
NSN: 5330-01-388-4177
CAGE Code: 0DEN2

Top nsn Manufacturers

3m purification inc
CAGE Code: 15472 		498 msug
CAGE Code: 5VW08
3m belgium nv
CAGE Code: B2281 		2001 humana press inc
CAGE Code: 34CH3
3 l filters ltd
CAGE Code: 37941 		1st solutions inc
CAGE Code: 0FY35,0TU77
331 l tech productions llc
CAGE Code: 01XA0 		24 hour distributors
CAGE Code: 12136,3WKM0
2709th af vehicle control group
CAGE Code: 10994 		3gen corporation
CAGE Code: 3SPS3
1db metravib
CAGE Code: FAQ34 		357319 ontario ltd
CAGE Code: 38510
4 s mfg
CAGE Code: 0D9C0 		3d safety services pty ltd
CAGE Code: Z2JB4
20th century spring mfg
CAGE Code: 0PZE8

5305PL0784918 part number of Inspektorat Wsparcia Sil Zbrojnych - Order Now!

Part Number : 5305PL0784918 Manufacturer : Inspektorat Wsparcia Sil Zbrojnych
NSN Number : 5305-01-346-2268 (5305013462268)
Item Name : Screw Close Tolerance CAGE Code : 9009H
NIIN : 013462268
FSC CODE : 5305 Screws

Thank you for taking an interest in part number 5305PL0784918, that of which is listed with the description Screw Close Tolerance; Manufactured by Inspektorat Wsparcia Sil Zbrojnych and listed alongside the NSN 5305013462268, part number 5305PL0784918 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number 5305PL0784918

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 5305PL0784918 with NSN 5305-01-346-2268, 5305013462268

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-346-2268

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050134622680N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
AIC984-L410595

Characteristics Data of NSN 5305-01-346-2268, 5305013462268

MRCCriteriaCharacteristic
AASBFASTENER LENGTH1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
AAURGRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
ANEEGRIP LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
CQFMHARDNESS RATING46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATTMATERIALSTEEL COMP H11 OVERALL
AAJDTHREAD CLASS3A
AASATHREAD LENGTH0.430 INCHES MINIMUM AND 0.501 INCHES MAXIMUM
AAJFTHREAD DIRECTIONRIGHT-HAND
CQBCMINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTCADMIUM OVERALL
THSDTHREAD SERIES DESIGNATORUNJF
Upload  

Frequently Asked Questions (FAQ): 5305PL0784918 NSN Part

What Type of Item Is Part Number 5305PL0784918?
  • Part Number 5305PL0784918 is an "Screw Close Tolerance" manufactured by Inspektorat Wsparcia Sil Zbrojnych Managed with the NSN 5305-01-346-2268. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number 5305PL0784918?
  • Screw Close Tolerance To receive a competitive quote for items with the part number 5305PL0784918, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 9009H Important When Purchasing Part Number 5305PL0784918?
  • CAGE Code 9009H signifies Inspektorat Wsparcia Sil Zbrojnych Managed as the manufacturer of Part Number 5305PL0784918, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-346-2268 Paired with Part Number 5305PL0784918?
  • Part Number 5305PL0784918 is the identification assigned to the item by Inspektorat Wsparcia Sil Zbrojnych Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-346-2268 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up