| Part Number : JM44LC33WD15NL | Manufacturer : J And M Products Inc | ||
| NSN : 5340-01-349-9928 (5340013499928) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 01-349-9928 (013499928) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number JM44LC33WD15NL, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340013499928, part number JM44LC33WD15NL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : JM44LC33WD15NL | Manufacturer : J And M Products Inc | ||
| NSN Number : 5340-01-349-9928 (5340013499928) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 013499928 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number JM44LC33WD15NL, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340013499928, part number JM44LC33WD15NL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-349-9928 Item PartTypeName: CLAMP,LOOP | 5340 | 013499928 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TA02503WDC15NL | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND WEATHER RESISTANT AND OZONE RESISTANT |
| AXWJ | FASTENING DEVICE TYPE | LOCK TAB |
| BZTN | LOOP INSIDE DIAMETER | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | LIGHTENING SLOT TO BE PROVIDED IN BAND FOR A MAXIMUM OF A 270 DEGREE AREA. SLOT TO BE 0.200 INCHES WIDE. WEDGE INCLUDED. |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.050 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| SFTT | SURFACE TREATMENT | CHROMATE BAND |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.924 INCHES MINIMUM AND 0.954 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.219 INCHES MINIMUM AND 1.249 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
