| Part Number : JM44LC33WD36 | Manufacturer : J And M Products Inc | ||
| NSN : 5340-01-381-1541 (5340013811541) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 01-381-1541 (013811541) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number JM44LC33WD36, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340013811541, part number JM44LC33WD36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : JM44LC33WD36 | Manufacturer : J And M Products Inc | ||
| NSN Number : 5340-01-381-1541 (5340013811541) | |||
| Item Name : Clamp Loop | CAGE Code : 22175 | ||
| NIIN : 013811541 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number JM44LC33WD36, that of which is listed with the description Clamp Loop; Manufactured by J And M Products Inc and listed alongside the NSN 5340013811541, part number JM44LC33WD36 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-381-1541 Item PartTypeName: CLAMP,LOOP | 5340 | 013811541 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5340-041WD36 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| BZTN | LOOP INSIDE DIAMETER | 2.235 INCHES MINIMUM AND 2.265 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | WEDGE DESIGN;THE USE OF THIS CLAMP PERMITS IT TO BE SNAPPED ON THE TUBE OR WIRE BUNDLE IN A CLOSED POSI- TION PRIOR TO BOLTING IN PLACE;EUIVAL-ENT MS21919WDG CLAMPS MAY BE USED FOR SERVICE REPLACEMENT |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8603 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.624 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5D FED SPEC SINGLE MATERIAL RESPONSE OVERALL AMS3209C ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL RUBBER CHLOROPRENE CLASS CR CUSHION |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.919 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
